Features
1).BMW AD have the HITAG 2 ( Version 2.05 ) features, Very easy you can program key or transponder to bmw vehicles equiped with CAS module. Programming key is required to have read eeprom of immobilizer, to load into the software to specify what position you want to program this key or transponder, and then modify the eeprom dump and program it into the immobilizer.Also you can read and program internal key memory where are stored ODOMETER, VIN.
2).BMW AD OBDII Connector have the K line and the CAN BUS system, it can work as BMW DASH / BMW INPA K+CAN / BMW SCNNER 1.40.
Supported Models
- 1 Series: E81/E82/E87/E88
- 3 Series: E30/E36/E46/E90/E91/E92/E93
- 5 Series: E28/E34/E39/E60/E61
- 6 Series: E24/E63/E64
- 7 Series: E23/E32/E38/E65
- 8 Series: E31
- X Series: X3-E83, X5-E53, X5-E70, X5-E71
- Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52
- MINI Series: MINI-R50/R52/R53/R55/R56/R57
Supported Systems
All systems of BMW series and OBD-II diagnostic system, including:
- Engine system
- Auto Transmission
- SRS
- ABS
- Cruise system
- Air-condition system
- EWS
- LKE
- BUS etc.
---------------------------------------------------------------------------------------
HITAG 2 Key Programmer:
Hitag2 programmer is universal key programmer, with additional option of key programming from dump. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically!
BMW DASH
BMW DASH E6x V2.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis. for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3')
Connecting with all electronic control modules in the vehicle.
For all electronic control units reading identification data, sw/hw versions, user information fields.
For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
Possibility to read/program memory of electronic control units (including CAS modules).
Synchronization DME/DDE and CAS.
BMW SCANNER 1.40
BMW INPA K+CAN